Send us a text

By providing your phone number, you consent to receive transactional/informational text messages (SMS) from Topline Pro. You can unsubscribe at any time by replying STOP. Message and data rates may apply. Message frequency varies.

By submitting this form, you agree to our Terms of Service & Privacy Policy.

the product we use

NexaNano Molecular Surface Treatment

Most exterior sealers work by laying a film across the top of a surface. The film is what does the protecting, so when it wears through, the protection goes with it. That is why traditional sealers need reapplying every year or two, and why they eventually crack, cloud, and peel.

NexaNano works differently. The particles are small enough to travel into the microscopic pores of concrete, wood, and stone, where they bond chemically with the material itself. There is no layer sitting on top to wear away. The surface keeps its original color and texture, but water and contaminants can no longer soak in.

It penetrates, not coats

The particles are a fraction of the width of a human hair, small enough to reach into pores that a conventional sealer simply bridges over.

It bonds at the molecular level

Once inside the material, the treatment chemically links to the substrate. The barrier becomes part of the surface rather than a layer resting on it.

It is water-based and non-toxic

No harsh solvents and no VOC fumes, so it is safe to apply around children, pets, garden beds, and established landscaping.

How It Compares to a Traditional Sealer

Traditional topical sealer

  • Sits on the surface as a separate film
  • Cracks, peels, and clouds as it ages
  • Typically needs reapplying every season or two
  • Often leaves a glossy or darkened finish
  • Water pools until it finds a gap in the film

NexaNano molecular treatment

  • Bonds inside the pores of the material
  • Nothing on top to crack, flake, or peel
  • One application, backed by a 10-year warranty
  • Invisible finish, no color or texture change
  • Water beads and runs off the surface

Diagrams are simplified to show the difference in how each product sits in the material. Actual results vary by surface type, age, and condition, which is why we assess every property before quoting.

What the Treatment Defends Against

This is the main cause of concrete failure in Iowa. Water soaks into the slab, freezes overnight, and expands. That expansion pushes the concrete apart from the inside, which shows up as surface flaking and cracking over a few winters. Keeping the water out removes the pressure that causes the damage.

How We Apply It

STEP 01

Assessment

We check the material, age, porosity, and current condition of each surface, then calculate how much solution it will take to saturate properly.

STEP 02

Preparation

The treatment only bonds to clean material, so we power wash away dirt, algae, and buildup and let the surface dry fully before anything is applied.

STEP 03

Application

We apply the solution evenly across the whole surface so penetration is uniform, with no thin spots or missed edges that would leave a weak point.

STEP 04

Inspection

We walk the finished work with you, confirm full coverage, and explain what to expect from the surface going forward.

Find out what NexaNano would do for your surfaces

Every property is different. We will assess your concrete, wood, or roofing and tell you honestly whether treatment makes sense before you spend anything.